Wheel Loader
2-Ton Wheel Loader-JM18H
Rated Load:
2000 kg
Rated Output:
42 kW / 2200 rpm
Rated Bucket Capacity:
1650 mm
JM18H
After sufficient market research, JM18H 2 Ton wheel loader has launched a new model with high work efficiency and low cost of use at home and abroad, which fully reflects the organic combination of reliability, advancement and economy. The proper matching of engine and torque converter not only satisfies good traction and digging performance, but also has low fuel consumption rate. It is suitable for shovel-like and short-distance handling of sand, stone, coal, mine, pavement materials and other bulk materials in mines, infrastructure, factories, roads, etc. High loading and unloading machinery.
Parameters
| Model | JM18H |
|---|---|
| Rated load (Kg) | 2000 |
| Rated bucket capacity(m³) | 1 |
| Dump Clearance | 3000 |
| Dump Reach | 750 |
| Max. drawing force(KN) | 58 |
| Diesel engine | YUNNEI YN33GBZ |
| Rated output(kW) | 65 |
| Transmission | / |
| Gear positions | 2 forward, 2 reverse |
| Length×Width×Height(mm) | 5800×1860×2730 |
| Operating weight(Kg) | 5000 |
| Wheel base(mm) | 1560 |
Features
It adopts the domestic famous YUNNEI force, which has excellent performance, strong power and low early failure. Equipped with hydraulic torque converter, suitable vehicle weight and corresponding speed ratio not only ensure strong traction and breakout force, but also suitable speed and good economy.
Our compact wheel loader adopts double-axle drive, wheel-side deceleration, swing-type rear axle, large pattern wide-base tires, and has good off-road performance and compact transmission structure.
The articulated frame is used for easy loading and unloading of the vehicle, with a small turning radius and flexible maneuverability.
It adopts single rocker arm, high fulcrum, short tie rod, new Z-type bucket rod system, double pump confluence, and strong digging ability. The strength of the boom is high. In order to adapt to the grasping, loading and unloading of various materials, the strength of the boom is increased, and the opening distance of the boom is enlarged. The working device has sufficient strength and rigidity to withstand large impact loads.
The dual-transmission system has an independent split structure, a single-stage single-phase three-wheel torque converter and a parallel shaft gearbox, with high transmission efficiency, ensuring the reliability of power transmission and good maintainability. The two-speed hydraulic shift gearbox is adopted, which can shift gears without cutting off the power, and the operation is safe and easy. In addition, the hydraulic transmission can automatically adapt to the change of external resistance within a certain range, so it does not need to shift frequently. High productivity and adaptability.
The load-sensing full-hydraulic control system with priority valve is adopted, with compact structure, small volume, convenient maintenance, energy saving and labor saving.
According to the user’s needs, the hydraulic crusher, the extension arm, the log gripper, etc. can be selected.
The cab adopts a sealed structure, which is comfortable to operate and has a visible area of more than 47%. A reinforced anti-roll canopy that can withstand huge loads can be equipped as required to ensure the safety of operators.
