JUNMA wheel bulldozers are combine the production capabilities of track-type crawler bulldozers with the mobility of wheel loaders. The excellent maneuverability of wheeled bulldozers allows you to perform a very wide range of tasks.
The JM1240 wheel bulldozer is designed for layer-by-layer digging, planning and moving of large quantities of soil, minerals and other materials. The wheel bulldozer is used in the development of placers, on dumps and as an auxiliary machine in quarries. The main futures of JM1240 wheel dozer are mobility, maneuverability and versatility.
Ease of operation and maintenance,reliability are the main criteria for the production of JUNMA bulldozers.
| BLADE CHARACTERISTICS | |
|---|---|
| Type | Straight Blade |
| Dozer blade capacity,m³ | 3.5 |
| Blade length,mm | 3600 |
| Blade height,mm | 1165 |
| Descent into the ground,mm | 390 |
| Blade lifting height,mm | 985 |
| Blade tilt (Right,Left),mm | 355 |
| Cutoff angle,° | 55 |
| Maximum inclination angle forward,° | 7.5 |
| Maximum inclination angle backward,° | 7 |
| Maximum tilt angle,° | 10 |
| WHEEL DOZER CHARACTERISTICS | |
| A.Length,mm | 6870 |
| E.Width,mm | 3500 |
| D.Height,mm | 3560 |
| Working weight,kg | 19200 |
| B.Wheelbase,mm | 3300 |
| F.Track Gauge,mm | 2250 |
| Gradebility,° | 30 |
| Ground Clearance,mm | 350 |
| G.Turning radius,mm | 6675 |
| Tractive force,kN | 160 |
| Working ambient temperature,C | -30~+45 |
| Working altitude above sea level,m | 0-4000 |
| Speed (forward/reverse)1st gear,km/h | 0-8 |
| Speed (forward/reverse)2nd gear,km/h | 0-15 |
| Speed (forward/reverse)3rd gear,km/h | 0-25 |
| Speed (forward/reverse)4th gear,km/h | 0-40 |
| Engine | Diesel,water-cooled,4-stroke,6-cylinder,direct injection,turbocharged |
| Engine model | Cummins, 6LTAA8.9-C280 |
| Engine capacity,L | 8.9L |
| Bore x stroke, mm | 102 x 120 |
| Engine Rated power,kW/HP | 209/280 |
| Hydraulic Tank,L | 170 |
| Fuel Tank,L | 350 |
| Battery,V | 24 |
| Rated speed,r/min | 2200 |
| Fuel consumption,gr/kW*h | 225 |
| Emission Standard | Euro-II |
| Maximum Torque,N.m | 1345 |
| Torque converter | YJ375 |
| Torque converter type | Single stage three element |
| Pump type | Gear pump |
| Hydraulic system pressure | 20 Mpa |
| Transmission | Full-powershift, countershaft type |
| Gear Shift Position (Forward/Backward) | 4 Forward and 4 Reverse gears |
| Tire size | TRIANGLE 23.5-25 L-3 20PR, career type,reinforced |
We will contact you within 2 hours, please pay attention to the email with the suffix “@junma-group.com”.
